Setting The Mdi/Mdi-X Switch - ADC 400F User Manual

S
ETTING THE
Using the MDI/MDI-X switch, the Megabit Modem 400F can communicate with a device on
the LAN that is either MDI or MDI-X without having to change the cable (a straight-through
cable is supplied with the installation kit).
Set the switch for the 10/100BASE-T port to either:
•
MDI-X when you are connecting to a device with an MDI port such as a PC with an
Ethernet NIC
• MDI when you are connecting to a device with an MDI-X port such as a hub, repeater,
bridge, or router
MDI-X
MDI
MDI MDI-X
Megabit Modem 400F User Manual
MDI/MDI-X S
For connection to
devices such as
a PC
For connection to
devices such as
a hub
10BASE-T RS232 MGMT
Chapter 3: Installing the Modem
WITCH
DSL POWER
13