Table of Contents
Advertisement
S
U
ETTING
P THE
For Bridge or Router mode you need to set the WAN VPI/VCI as supplied by your service
provider.
1
From the
Main Menu
Session group 1 - 16
10. Session 10
11. Session 11
12. Session 12
13. Session 13
14. Session 14
15. Session 15
16. Session 16
17. Get next group
The WAN Session screen presents data related to each session defined for your Bridge/Router.
The following table provides a description of the four fields displayed on the WAN Session
screen.
Column
1
2
3
4
MM701G User Manual
WAN
, select
WAN Setup
1. Session 1
Bridge
2. Session 2
IPoA-Router
3. Session 3
PPP-Router
4. Session 4
UNDEFINED
5. Session 5
UNDEFINED
6. Session 6
UNDEFINED
7. Session 7
UNDEFINED
8. Session 8
UNDEFINED
9. Session 9
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
UNDEFINED
Select session for editing (Return to exit) ->
Description
The session number—sessions 1-16 are displayed on the first page of the
screen and sessions 17-31 are displayed on a the second page of the WAN
session screen.
Example: 2. Session 2
Session name—up to 15 characters may be entered for a descriptive name
for a session. No spaces are allowed. Use this field to help identify each of
your sessions.
Example: IPoA-Router
Session protocol—configured for this session.
Example: RFCF1483 Router
Session status indicator—enabled or disabled.
Chapter 4: Managing the Modem Using the Console Port & Telnet
. The WAN Session screen displays.
RFC1483 Bridge
RFC1483 Router
PPPoA
(Enabled)
(Enabled)
(Enabled)
45
Advertisement
Table of Contents
