Load Ip 265 Via I/O Bus" Form - Siemens SIMATIC S5 Manual

IP 265
Starting the load
"Load" form
Function Selection
F1 F2 F3 F4 F5 F6 F7
Load IP
(COM 265 message)
F1 F2
Load
: The selected IP 265 user program, i.e. "IP265", is loaded into
F1
the IP 265 in slot 0.
Once the load has been started, COM 265 takes care of loading the program data. COM 265
displays the amount of program data loaded, in percent, on the message line at the right of the
screen.
Note
If the IP 265 is equipped with an EEPROM, the user program is loaded into this
submodule as well.
EWA 4NEB 812 6130-02a
"Services"
F4
F8
IP265 program: IP265
F3 F4
Figure 11-2. "Load IP 265 via I/O Bus" Form
COM 265 Services and File Functions
Load IP 265
"Load IP"
F2
F1 F2
Slot: 0
Data transferred: 40%
F5 F6
F3 F4 F5 F6 F7 F8
F7 F8
Return
11-3