Programming The Ip 265 With Com; Defaults - Siemens SIMATIC S5 Manual

IP 265
9

Programming the IP 265 with COM 265

The following sections cover procedures for programming the IP 265 with COM 265.
It has been assumed that you have made the preparations for working with COM 265 discussed in
Section 8.1.
COM 265 provides Help forms and Help windows ( Section 8.5.1). You can screen information on
the selected COM 265 form by pressing <HELP> and <F7> "Info".
9.1

Defaults

Before starting to program, you should set a number of defaults relating to all COM 265 functions.
"Defaults" form
Function Selection
F1 F2 F3 F4 F5 F6
COM265 default values
Drive:
IP265 slot number:
Drive:
Drive:
Progr. type (A = User /S = Standard):
(Note: If Standard, no longer readable from E(E)PROM!)
F1 F2
Select
EWA 4NEB 812 6130-02a
"Defaults"
F6
F7 F8
C
0
F3 F4
Figure 9-1. "Defaults" Form; Defaults for COM 265
Programming the IP 265 with COM 265
Defaults
F1 F2 F3
Program name:
PLC footer file:
PLC printer file:
F5 F6
Store
F4 F5 F6 F7 F8
NONAM
@@@@@@F1.INI
@@@@@@DR.INI
A
F7 F8
Info
9-1