4.9.1 Coupling via TCP/IP with "OCM" functions
4.9.1.1
Configuring the coupling-relevant S7 hardware
Application Module FM 458-1 DP - User Manual
A5E01078222-02
Edition 03.2009
This chapter describes the procedure when configuring the WinCC
access to process variables (block connections) of the SIMATIC S7-400
application module FM458-1 DP.
A CP443-1 ADV can be configured as communication module for the
TCP/IP coupling.
To change the IP address, click on the Properties button. The IP address
can then be changed in the window that opens.
Configuring
4-109