Siemens SIMATIC S5 Manual page 108

IP 265
The specifications in the "Defaults" form can either be entered on the keyboard or chosen from the
selection window for the relevant input field. You can screen additional information on the input fields
and various editing options by pressing <F7> "Info".
Note
COM 265 stores all entries in the "Defaults" form on one file. On a COM 265 cold
restart, the last entry made in each input field is regarded as the default for that field,
and as such is transferred to the "Defaults" form. All COM 265 functions are
subsequently based on the current default values.
Example:
Re-editing the program name
Set the cursor to the "Program name" input field (with <TAB>).
Enter the required program name (e.g. "IP265") on the programmer keyboard.
Confirm your entry with <1> or <INSERT>. (Or press <ESC> to revoke your entry).
Picking the slot number from the selection window
Position the cursor (with <TAB>) to the "IP265 slot number" input field (unless it is already set
to this field!).
Open the selection window for this input field by pressing <F1> "Select".
Set the cursor to the relevant text line in the selection window.
Transfer the selected slot number to the input field by pressing <1> or <INSERT> (or revoke
your selection with <ESC>).
Forward the two default values to program memory by pressing <F6> "Store".
EWA 4NEB 812 6130-02a
Programming the IP 265 with COM 265
9-3