Siemens SIMATIC S5 Manual page 161

IP 265
• CSF format and text format during simulation
You can choose between two formats when simulating the IP 265 user program:
- Control system flowchart format (default)
The control system flowchart appears as in COM 265's "Editor form"
- Text format
IP 265 inputs, IP 265 outputs, parameters and selected COM 265 language elements are
displayed, together with their current signal states and values, in table form.
When the simulator is started, the control system flowchart format is automatically enabled. You
can change to text format and back as follows:
CSF format (default)
Simulator
&
I 0.0
I 0.1 Q 0.5
F1 F2 F3 F4 F5 F6 F7 F8
All information presented in the following sections is based on CSF format. You will find more
detailed information on text format in Section 10.1.7.
• Symbols during simulation
The simulator supports you with a large number of symbols. In Section 10.1.5 ("Symbols for
Simulator Settings") you will find an overview of all symbols appearing on the programmer
screen during the on-line test.
• Printing out the IP 265 user program in the simulator level
It is possible to print out the on-screen segment in CSF format. To do so, press
<CTRL> <P>. In text format, you can print out the entire IP 265 user program by pressing
the same two keys.
EWA 4NEB 812 6130-02a
"Text"/"CSF"
F7
Testing and Simulation with COM 265
Text format
Simulator
...
IP-I.
I 0.0 = 0 Q 0.5 = 0
I 0.1 = 1
. .
. .
. .
F1 F2 F3 F4 F5 F6 F7 F8
IP-Q.
10-3