Siemens SIMATIC S5 Manual page 179

IP 265
"Online" form
Function Selection
F1 F2 F3 F4 F5 F6
Online test
Input parameters
ENABLE = 1
IP at STOP, loaded, EEPROM submodule inserted, load 8%
IP265 error: Wirebreak
F1 F2
IP-RUN IP-STOP
COM 265 supports on-line testing via function keys. Press <HELP> for information on the
execution of on-line test functions.
User displays
• Parameter values
The parameter values are displayed in table form, by word or by bit.
Parameters with symbolic identifiers in the IP 265 user program also appear in the on-line test
parameter list under these symbolic identifiers.
Note
If the parameters with symbolic addresses are to be displayed on the programmer
screen, the same program must be in the programmer's current drive.
EWA 4NEB 812 6130-02a
"Test"
F3
F7 F8
IP265 program: IP265
Input parameters
Status of the High Speed Sub Control
F3 F4
Value
Figure 8-3. "Online" Form
Testing and Simulation with COM 265
Online
"Online"
F1
F1 F2
Creation date: 3.12.1992
Output parameters
ON/OFF = 1
F5 F6
F3 F4 F5 F6 F7 F8
Output parameters
F7 F8
Return
10-21