KEB COMBIVERT R6 Instruction Manual page 15

Attention
With applications requiring the COMBIVERT R6 to be switched on and off cyclically, main-
tain an off-time of at least 5 min. If you require shorter cycle times please contact KEB.
Switching off during the initialization phase can cause undefined conditions.
Attention
When using systems with RCD, the instructions or the requirements of VDE 0100 -T 530
(IEC 60364-5) must be observed. The recommended tripping current of the RCD type „B" is
300 mA.
Cyclic activation and deactivation
RCD (residual current operated circuit-breaker)
Safety Instructions
15