51.84 Mb/S (Sts-1) Output Mask Tests - Agilent Technologies J2126A Installation And Verification Manual

3
Performance Tests
132

51.84 Mb/s (STS-1) Output Mask Tests

1 Press <Menu>, choose Tx/Rx > Stored Settings then press
<Select>. Select Default then Recall.
2 Press <Menu>, choose Tx/Rx > Transmitter Settings then
press <Select>. Select the Physical tab. Set the Signal Rate
to STSX-1.
3 Connect the 52 Mb/s OUT port to the Oscilloscope CHAN 1,
using the E2622A Termination Adapter Probe.
Installation and Verification Manual