Table of Contents
Advertisement
2
Installation (Getting Started)
Clock Ports
54
2 Mb/s, 2 MHz Clock In BNC 75 ohm (nominal) unbalanced
connector for a 2 Mb/s and 2 MHz MTS external clock source
input.
2 Mb/s, 2 MHz Clock In 3-pin Siemens connector for a 2 Mb/s
and 2 MHz MTS external clock source input.
DS1 Clock In Bantam 100 ohm (nominal) connector for a DS1
BITS external reference clock input.
2 MHz Clock Out BNC 75 ohm (nominal) unbalanced connector
for a 2 MHz MTS clock reference output. Generated relative to
the selected transmit reference clock.
DS1 Clock Out Bantam 100 ohm (nominal) connector for a DS1
BITS clock reference output. Generated relative to the selected
transmit reference clock.
TX Eye Clock 52 - 2.5 Mb/s SMA connector providing a TX Eye
Clock signal (at 1/4 of the line rate) which can be used to trigger
an oscilloscope when examining data signals.
TX Eye Clock 10 Gb/s SMA connector providing a TX Eye Clock
signal (at 1/16 of the line rate) which can be used to trigger an
oscilloscope when examining data signals.
Installation and Verification Manual
Advertisement
Table of Contents
