Agilent Technologies J2126A Installation And Verification Manual page 103

Transmission Test Set
Optical Out
Depending on
TX wavelength(s)
available
Installation and Verification Manual
3 Connect the test set-up as shown below depending on the
wavelengths installed.
These ports are
combined on some
instruments
step 6 and 20
8156A Optical Attenuator
4 Set the Optical Attenuator to:
ATTEN 15 dB
WAVELENGTH 1310 nm (or 1550 nm depending on
wavelength used)
Performance Tests
8163/81633A Optical Power Meter
3
101