2
Installation (Getting Started)
Optical Connector Safety Information
CAU TI O N
WA RN ING
46
The connectors available for connecting to the network depend
on the options fitted to your instrument.
For more information, see:
• "Avoiding Optical Receiver Overload" on page 48
• "Cleaning Optical Connectors" on page 28
• "Additional Precautions for Service Engineers" on page 49
• "Laser Warnings and Cautions" on page 46
Laser Warnings and Cautions
Before connecting, note the Warning and Caution information
given.
All Connectors
When connecting or disconnecting, ensure that you are grounded or,
make contact with the metal surface of the Mainframe with your free
hand to bring you, the module, and the mainframe to the same static
potential.
Modules remain susceptible to ESD damage while the module is
installed in the Mainframe Additional ESD information is required
when servicing, see your Verification manual for further information.
Optical Interface Connectors
For your protection, review all laser information given in this
manual and the Verification manual before installing or using
the instrument.
To prevent personal injury, avoid use that may be hazardous to
others, and maintain the instrument in a safe condition. Ensure the
information given below is reviewed before operating the
instrument.
Installation and Verification Manual