Table of Contents
Advertisement
3
Performance Tests
Performance Self Test
NO TE
Description of the Performance Self Test
68
Part of the instrument Self Test is used for the Performance
Tests. This provides a high degree of confidence that the
relevant measurement hardware is operating correctly in
advance of completing the Performance Tests.
A full overview of the Self Test is given later in the manual.
This section gives an description of the Self Tests that are
required to be completed as part of the Performance Tests and
covers the following:
• "Description of the Performance Self Test" on page 68
• "Loopback Connections Required for Self Test" on page 69
• "How to run the Self Test" on page 72
• "What to do if the Self Test fails" on page 72
The Self Test comprises of a selection of tests covering different
areas of hardware in the instrument. For the purposes of the
Performance Self Tests, the Confidence Test, the Frequency
Measurement Test and all Ethernet Tests (if Ethernet is fitted)
should be completed. These are selected from the main Self Test
menu. If a failure occurs during a test then a descriptive text
message and Fail Code is returned.
The Self Test is selected by pressing the <Menu> key and
selecting System > Self Test. An example of the Self Test page is
shown.
Installation and Verification Manual
Advertisement
Table of Contents
