Table of Contents
Advertisement
Connectors on Instrument Front/Right Side Panel
Installation and Verification Manual
LAN 10M/100M
Mouse
USB
Keyboard
RS232
VGA
LAN 10M/100M 10/100 Base-T LAN interface port. Supports
remote control of the test set and the downloading of firmware
upgrades.
10 Base-T LAN Connection Radiated Emissions
compliance with EN 55011 (1991) a category 5, STP patch lead,
RJ45 cable should be used to connect to the LAN port.
Mouse PS/2 port for connecting a mouse. To prevent possible
damage, the mouse should only be connected and disconnected
when the instrument is powered off.
USB Two Universal Serial Bus ports for connecting to a
Printer.
Keyboard PS/2 port for connecting an external keyboard. Can
be hot-plugged for use at any time. Ensure that keyboard port is
used - if connected to mouse PS/2 port in error the instrument
will require to be restarted
RS232 Remote Control port providing following
configurations:
Installation (Getting Started)
Power
On/Off
To ensure
.
2
59
Advertisement
Table of Contents
