Table of Contents
Advertisement
NO TE
Installation and Verification Manual
Description
This test ensures the Electrical Transmitter output level and pulse shape
meet the required specifications. The Transmitter output is connected to
an Oscilloscope and the waveshape compared with the predefined
masks stored in the Oscilloscope memory. The signal levels are also
measured using the Oscilloscope.
Equipment Required
Oscilloscope
Patch Cable
Patch Cable
Procedure
This performance test uses the Infinium 54810A Oscilloscope with Option
100 (E2625A) Telecom Masks Template Kit. If any other Oscilloscope is
used refer to the scope information for Mask measurement. It is assumed
the appropriate Masks are installed in the Infinium.
Performance Tests
54810A with Option 100
Communication Mask Kit (E2625A)
15512A Siemens 3 pin
15670A Bantam 110 ohm
3
115
Advertisement
Table of Contents
