Table of Contents
Advertisement
IPT-HH20
Software description PF_Ident
Interface and operating
modes
2way
BD_MAC
Options submenu
Submenu
Menu entry
Description of the submenu
Options
In the Options submenu, you have the option of configuring the interface to connect and
disconnect automatically. You can also adjust the timeout setting (in ms) for the V commands.
Description of menu entries
auto connect.
If the Auto connect menu entry is activated, the Handheld is connected automatically to the
computer via the interface when the interface cable is attached.
auto disconnect
If the auto disconnect menu entry is activated, the Handheld is disconnected from the
computer automatically after the data is transferred.
92
Description
Two-way communication between the Handheld and the
evaluation unit. Data is transferred in packets as per protocol
and achieves a reliable transfer because the Handheld always
waits for a response from the evaluation unit before deleting
data from the internal memory. The data is transferred again
automatically if necessary. The two devices also continuously
check whether the connection to the respective end device is
still active (end-to-end handshake).
Pepperl+Fuchs offers "XML router - BE" software for XML
Bluetooth modems. This software is suitable for Windows PCs
and Windows Pocket PCs. "XML Router - BE" also offers
Bluetooth-to-keyboard-wedge communication for applications
that require a keyboard port. Select 2way operating mode when
using the XML Bluetooth modem.
BD_ADDR for the Bluetooth receiver
--
auto connect
auto discon.
Timeout
Advertisement
Table of Contents
