Table of Contents
Advertisement
IPT-HH20
Software description PF_Ident
Instructions on Read fixcode function
Read fixcode
Read the fixcode from a data carrier as follows:
1.
Select Read/Write > Read fixcode.
2.
Position the read/write head on the Handheld directly beside the data carrier.
3.
Press the left softkey (
If the read process is successful, the status LED lights up yellow and then green. If you
have activated the buzzer and the vibration alarm in the Settings menu, an acoustic signal
sounds and the Handheld vibrates. The read data is then displayed in line with the
selected data format. If the transfer was unsuccessful, the status LED briefly flashes red
and a fault indication is issued. See see chapter 8
4.
Press the right softkey (
).
) to exit the function.
57
Advertisement
Table of Contents
