Read/Write > Data Write - Pepperl+Fuchs IPT-HH20 Manual

IPT-HH20
Software description PF_Ident
9.1.2 Read/Write > Data write
In this menu, you have the option of writing data to a data carrier.
Data write menu
Submenu
Menu entry
Description of menu entries
Address
In the data input field of the Address menu entry, you have the option of changing
the start address.
Start addresses specify the location of the individual data blocks on data carriers. You can read
out specific data blocks and transfer data by changing the start address.
Defining a start address
Define the start address as follows:
1. Select Address.
2. Enter the start address using the input keys.
3. Press the left softkey (
Number of blocks
In the data input field of the No. blocks menu entry, you have the option of changing the
number of blocks.
The number of blocks determines how many data blocks the Handheld reads from the data
carrier and how many data blocks are written to the data carrier. Each address block contains 4
bytes, i.e. in ASCII format, you can enter 4 characters for each block in the data input field of
the Data menu entry, in hexadecimal data format 8 characters (2 characters each) and in
decimal data format 12 characters (3 characters each).
Options
Address
No. blocks
Data
) to confirm your entry.
45