Table of Contents
Advertisement
IPT-HH20
Commissioning
Connecting the interface cable to the Handheld
To connect the interface cable to the Handheld, proceed as follows:
1.
Turn the 8-pin DIN plug so that the arrows on the plug are pointing downwards.
2.
Hold the Handheld in your hand with the controls facing upwards.
3.
Insert the plug into the corresponding cable connection socket on the Handheld.
4.
Press the plug firmly into the cable connection socket until the locking device audibly
engages.
The interface cable is now connected to the Handheld.
Note!
Connection cable with fitted grip
If you have mounted the Handheld to the optional grip, connect the interface cable to the cable
connection socket on the grip.
Connecting the Handheld to the computer via the RS 232 interface cable
Connect the Handheld to the computer as follows:
1.
Switch off the computer.
2.
Connect the RS 232 plug on the interface cable to the RS 232 interface on the computer.
3.
Connect the low-voltage plug on the power supply unit to the low-voltage socket on the
RS 232 interface cable.
4.
Connect the power supply unit to the mains power supply.
5.
Switch on the computer.
The Handheld switches on automatically once you have connected it to the computer. The
symbols
28
and
are displayed in the toolbar.
Advertisement
Table of Contents
