Table of Contents
Advertisement
IPT-HH20
Software description PF_Ident
Changing the number of blocks
Change the number of blocks as follows:
1.
Select No. blocks
2.
Press the CLEAR input key (
3.
Enter the number of blocks using the input keys.
Options submenu
Submenu
Menu entry
Description of menu entries
Copy
You can use the Copy menu entry to transfer the data currently being read to the Data write
menu.
Data copy
To use this option to copy data, proceed as follows:
1.
Read in the data on one or more data carriers.
2.
After reading in the last data carrier, press the right softkey (
read mode.
3.
Select Options > Copy.
If the copy process is successful, "Data assumed" appears on the display and the status
LED lights up green. If the copy process fails, a fault indication is issued.
See see chapter 8
42
) to delete the quantity already entered.
Data format
apply to key
Copy
) to exit
Advertisement
Table of Contents
