Table of Contents
Advertisement
IPT-HH20
Software description PF_Ident
Control submenu
Submenu
Menu entry
Description of menu entries
Standard read
In the data input fields in the Standard read menu entry, you have the option of defining the
start and end address of the data area you wish to read.
Password protect
If password protection is deactivated, data can be written to all data words located outside of
the write-protected area. If you wish to write to a word in this area, the "word protection" setting
must be modified accordingly. If password protection is activated, data can be written to all data
words located outside of the write-protected area on the condition that the correct password is
set and password mode is activated.
If password protection is deactivated, all data words can be read. If password protection is
activated, the read-protected area is active, i.e. this area can only be read if the correct
password was set using the "Password set" command and password mode was activated
using the "Password mode" command. If the read-protected area is read when password mode
is deactivated, the data is set to "0 x 000".
70
Options
Standard read
(starts/end)
PSW protect
User bits
Advertisement
Table of Contents
