Table of Contents
Advertisement
IPT-HH20
Operation
Entering data manually
Enter a new value as follows:
1.
Select Storage.
2.
Press the left softkey (
3.
Select Enter data.
4.
Enter the data record using the input keys.
5.
Press the Enter navigation key (
The value is saved as a new data record.
Note!
Observe the input format
Data bytes in hexadecimal data format must always contain 2 characters and data bytes in
decimal data format must contain 3 characters.
) to open the options.
) to confirm your entry.
37
Advertisement
Table of Contents
