Table of Contents
Advertisement
IPT-HH20
Operation
7.3
Editing and entering data manually
Editing data manually
Edit data that has already been entered as follows:
1.
Select Storage.
2.
Press the left navigation key (
data record.
3.
Press the left softkey (
4.
Select Edit.
5.
Press the
characters entered, not individual characters within the character string.
6.
Enter the required modifications using the input keys.
7.
Press the left softkey (
The value in the memory is edited.
Note!
Observe the input format
Data bytes in hexadecimal data format must always contain 2 characters and data bytes in
decimal data format must contain 3 characters.
36
) or right navigation key (
) to open the options.
key to delete individual characters. You can only delete the last
) to confirm your modification.
) to browse to the relevant
Advertisement
Table of Contents
