Table of Contents
Advertisement
IPT-HH20
Software description PF_Ident
Note!
Observe the input format
Data bytes in hexadecimal data format must always contain 2 characters and data bytes in
decimal data format must contain 3 characters.
Editing data records
Modify data records as follows:
1.
Press the left navigation key (
data record.
2.
Press the left softkey (
3.
Select Edit.
4.
Press the CLEAR input key (
the last character entered, not individual characters within the character string.
5.
Enter the relevant data in the correct syntax for the data format selected using the input
keys.
6.
Press the left softkey (
7.
Press the right softkey (
Delete
This command gives you the option of deleting the data record currently selected.
Deleting data records
Delete data records as follows:
1.
Press the left navigation key (
data record.
2.
Press the left softkey (
3.
Select Delete.
A message does not appear on the display to confirm that the delete process was
successful. The only indication is that the total number of data records shown in the status
bar on the display decreases by one.
) or the right navigation key (
) to open the options.
) to delete individual characters. You can only delete
) to confirm your selection.
) to exit the Storage menu.
) or the right navigation key (
) to open the options.
) to open the relevant
) to open the relevant
79
Advertisement
Table of Contents
