Table of Contents
Advertisement
IPT-HH20
Installation
Securing the interface cable against accidental removal
You have the option of fitting a protective cap in order to secure the interface cable against
accidental removal. To do so, proceed as follows:
1.
Connect the interface cable to the cable connection socket on the handle.
2.
Guide the cable into the slot on the protective cap and push the protective cap towards the
cable connection socket.
3.
Ensure that you push the protective cap in the correct position over the interface cable.
4.
Screw the protective cap to the handle using the screws supplied.
The interface cable is now secured against accidental removal.
Note!
For secure mounting of the Handheld, we recommend that you secure the Handheld using the
screws supplied. Two holes have been drilled on the lower section of the handle for this
purpose (see illustration).
23
Advertisement
Table of Contents
