Table of Contents
Advertisement
IPT-HH20
Commissioning
6.3.3
Cable operation: PS/2
Adjusting the settings for the PS/2 interface on the Handheld
Adjust the settings for the PS/2 communication interface on the Handheld as follows:
1.
Select Settings > Communication
2.
Activate the PS2 interface.
A prompt appears asking you whether you wish to use the Handheld in PS2 mode.
3.
Press the left softkey (
The interface is now activated.
4.
Press the right softkey (
Note!
Required PS/2 interface cable
You will require a PS/2 interface cable with the following connectors to connect the Handheld to
the computer:
•
8-pin DIN connector for connection to the Handheld.
•
PS/2 socket for connecting an external keyboard.
•
PS/2 connector for connection to the computer.
Connecting the interface cable to the Handheld
To connect the interface cable to the Handheld, proceed as follows:
1.
Turn the 8-pin DIN plug so that the arrows on the plug are pointing downwards.
2.
Hold the Handheld in your hand with the controls facing upwards.
3.
Insert the plug into the corresponding cable connection socket on the Handheld.
4.
Press the plug firmly into the cable connection socket until the locking device audibly
engages.
The interface cable is now connected to the Handheld.
Connecting the Handheld to the computer via the PS/2 interface cable
Connect the Handheld to the computer as follows:
1.
Switch off the computer.
2.
If an external keyboard is connected to the computer, disconnect it.
3.
If you are using a USB keyboard, connect the keyboard to the PS/2 socket on the interface
cable using a suitable adapter. If you are using a keyboard with PS/2 plug, insert the plug
directly into the PS/2 socket on the interface cable.
4.
Connect the PS/2 plug on the interface cable to the keyboard port on the computer.
5.
Switch on the computer.
The Handheld switches on automatically once you have connected it to the computer. The
symbols
Voltage is supplied to the Handheld via the PS/2 interface. An additional power supply unit is
therefore not necessary.
) to confirm your selection.
and
are displayed in the toolbar.
) to exit the menu.
29
Advertisement
Table of Contents
