Table of Contents
Advertisement
User Manual - PolyGard
Multi-Gas-Controller MGC2-K Honeywell
8 Menu Overview
Menu operation is done via a clear, intuitive and logical menu structure. The operating menu contains the
following levels:
•
Starting menu with indication of the device type if no MP (Measuring Point) is registered. Otherwise
scrolling display of the gas concentrations of all registered sensors in 5-second intervals. If alarms are
active, only the values of the sensors currently in alarm status will be displayed.
•
Main menu
•
Submenu 1 to 3
Power On Time
19s
Seconds indicator = 0
Honeywell
MGC2-K
D1 CH4 % LEL
Warm-up Time
Starting menu
®
PolyGard
is a registered trademark of MSR
Phone 0049(0)8531/9004-0
Fax: 0049(0)8531/9004-54
MSR-Electronic GmbH, Bgm.-Schoenbauer-Str. 13, D 94060 Pocking www:msr-electronic.de Made in Germany
®
2
Power On Time of the basic device
Second counter counts down, when communication between display <> basic
device is OK. In case of communication error, the count-down will stop.
MGC2-K
= Multi Gas Controller Kompakt
After about 5 seconds
"Warn-up Time" is displayed. As soon as the sensor warm-up period has
expired, the measured value is displayed = measuring mode.
Main menu
System Errors
Alarm Status
Relay
Status
Measuring Values
Display
Parameter
Installation &
Calibration
Service Mode
OFF
Submenu 1
Reading and acknowledgement of errors
See from point 8.1
Display of the alarm status of active alarms
See from point 8.2
Display of the relay status
See from point 8.3
Display of measuring values
See from point 8.4
General display parameters without safety relations
See from point 8.5
Reading and change of the relay, measuring point
and system parameters as well as test and calibration
functions
Specification subject to change without notice
Page
10
GAMGC2-K_E_0320
Advertisement
Table of Contents
