Festo CPX-FB13 Electronic Manual page 69

2. Commissioning
Fig. 2/9: Setting the system parameters with STEP 7
Festo P.BE-CPX-FB13-EN en 0112NH
1
2
Parametrizing the diagnostic memory
Maximum 40 diagnostic messages can be saved in the diag-
nostic memory. With the aid of the HW Config, DPV1 or the
handheld, you can parametrize the way in which the mess-
ages are to be saved.
1. Click the value of the parameter "Diag.Buffer – Mode" or
"Diag.Buffer – Error end"
A dropdown list with the possible values will open up.
2. Modify the value as follows and confirm with OK.
3 4
2-27