Running The Setup Wizard - Nortel CallPilot Series Upgrade Manual

98 Chapter 6 Running the Setup Wizard
•
•
Assembling your tools
Assemble the tools required to set up the CallPilot 5.0 server:
•
•

Running the Setup Wizard

When the server is powered on for the first time, a mini-setup process
launches that consists of a number of reboots. When this process is
complete, the Windows Logon screen is appears.
Starting the Setup Wizard
Step
1
2
Copyright © 2007–2009, Nortel Networks
.
Restart the system (if prompted by Windows).
Log on to the CallPilot server. The default password for the Administrator
account is set to Bvw250.
CAUTION
Ensure you use the backup created from the CallPilot
5.0 Upgrade Wizard for the following reasons:
1. It provides the most current view of the system.
2. The CallPilot 5.0 Upgrade Wizard corrects the data
prior to the backup. This ensures a clean backup and a
smooth upgrade.
3. Using an earlier backup tape can result in issues
encountered during the restore and upgrade process
under CallPilot 5.0.
4. The backup from the CallPilot 5.0 Upgrade Wizard
includes the CallPilot 5.0 Upgrade Wizard logs so that
they are brought forward to CallPilot 5.0. These logs can
be used by NETS in the rare event of an upgrade failure.
recommended CallPilot 5.0 SUs and PEPs on CD
backup from the CallPilot 5.0 Upgrade Wizard
Note: Windows 2003 uses plug and play. Ensure any peripheral device
is connected and powered up before you power on the server.
Action
Log on to the CallPilot server when the Windows Server 2003
mini-setup process is completed. The default password for the
Administrator account is Bvw250.
The Setup Wizard automatically launches if you log on to an
unconfigured CallPilot server. A CallPilot server, freshly upgraded
Nortel CallPilot
Upgrade and Platform Migration Guide
NN44200-400 01.12 Standard
5.0 24 April 2009