Chapter 4 Updating The Server; Getting Started - Nortel CallPilot Series Upgrade Manual

Chapter 4
Updating the server
In this chapter
"Getting started" (page 61)
"Replacing 1002rp T1/SMDI server hardware" (page 62)
"Expanding the 1002rp AML system" (page 66)
"Upgrading the system BIOS" (page 69)
"Installing the CallPilot 5.0 Image" (page 73)

Getting started

The installation of the CallPilot image has three major steps:
•
•
•
Based on which server you have, use the following table to guide you to the
appropriate next section. Be sure to assemble your required tools before
proceeding. See the following section
the CallPilot 5.0 Image" (page
If your server is
201i
201i
Copyright © 2007–2009, Nortel Networks
.
Perform required hardware upgrades.
Update the system platform hardware, if required.
Use the CallPilot 5.0 Image CDs or DVDs to install a fresh image of the
Windows Server 2003 operating system and CallPilot server software
on your CallPilot server.
Upgrading
from
2.02
3.0 or later
Nortel CallPilot
Upgrade and Platform Migration Guide
NN44200-400 01.12 Standard
5.0 24 April 2009
"Assemble the tools required to install
62).
Proceed with
the section "201i: Updating the system
BIOS" (page 69)
the section "Installing the CallPilot 5.0
Image" (page 73)
61