Running The Configuration Wizard - Nortel CallPilot Series Upgrade Manual

106 Chapter 7 Configuring the CallPilot system
Running the Configuration Wizard
Logging on to CallPilot Manager
Step
1
2
3
4
5
Copyright © 2007–2009, Nortel Networks
.
Note: You must upgrade CallPilot Manager and CallPilot Reporter on
a stand-alone Web server before you proceed. The required files are
located on the Application CD.
Action
When the Windows log on screen appears, log on with the default
password (Bvw250).
Note: 1. When you run Internet Explorer for the first time you are
asked to make IE the default browser for the server. Click Yes.
Launch Internet Explorer.
Enter http://<server name or IP address>/cpmgr in the URL
address box.
Result: The CallPilot Manager Logon Web page appears.
Run the Configuration Wizard after a successful upgrade and after
the data has been restored. (The Configuration Wizard is accessed
from the CallPilot Manager main screen.) The system launches the
Web browser and prompts you to log on to CallPilot Manager. Log
on using your existing CallPilot logon information. Enter information
into the following:
• Mailbox Number—Enter your existing mailbox number.
• Password—Enter your password.
• Server—Specify the name or the IP address of the CallPilot
server that you want to configure. (The server name may have
changed during the upgrade or platform migration.)
Note: When you launch Internet Explorer, you may see a box
that says "M/S IE Enhanced Security config is currently enabled
on your server. This advanced level of security reduces risk."
Nortel recommends that you do not lower the security level.
Nortel also recommends that you do not select the check box
to not show the message again. If you do lower the security
level and you try to access a Web site off the server, it may be
blocked by the security setting. You do not receive a warning but
a blank screen appears.
Click Login.
Result: The system may prompt you to change the password for
the Administrator mailbox.
Nortel CallPilot
Upgrade and Platform Migration Guide
NN44200-400 01.12 Standard
5.0 24 April 2009