This section instructs you on how to service each component inside the Gas and Electric Dryers.
The components and their locations are shown below.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
Machine Control
Electronics
Board
Drum Roller
(1 of 4)
Belt Switch (Mounted
On Drive Motor Bracket)
Drive Motor
Thermal Fuse
Thermistor
COMPONENT ACCESS
COMPONENT LOCATIONS
FIRE HAZARD
Shut off gas supply line valve before
servicing.
Check all gas line connections and re-
place all panels before operating.
Failure to do so could result in explosion,
fire, or other injury.
4-1
Drum Light
Console
Electronics Board
Console
Electronics Board
Belt & Drum
Thermal Cutoff
(Electric Only)
High-Limit Thermostat
Heater (Or Gas Burner)
NOT SHOWN:
Door Switch &
Moisture Sensor