End Of Cycle Signal - Whirlpool duet GGW9200L Series Job Aid

• For the Casual Cycle, the Wrinkle Shield
feature is preset to On. The other Automatic
Cycles will retain the Wrinkle Shield feature
setting.
NOTE: If you do not select the Wrinkle Shield
feature, the dryer stops after cool down.
Temperature
Use the Temperature settings to select tem-
peratures for the Manual Cycles. Press the
Temperature button until the desired tempera-
ture setting is indicated on the display. Tem-
perature settings cannot be used with the Au-
tomatic Cycles.
High
Medium
Low
Extra Low
Air Only
Temperature
(Manual Cycles only)
Air Only
Use for items that require drying without heat,
such as rubber, plastic and heat-sensitive fab-
rics. NOTE: The Air Only feature will not oper-
ate with Automatic Cycles.

End of Cycle Signal

The End of Cycle Signal produces an audible
sound when the drying cycle is finished.
Promptly removing clothes at the end of the
cycle reduces wrinkling.
End Of Cycle Signal
Press the End of Cycle Signal to adjust the
sound level or turn off the signal.
NOTE: When Wrinkle Shield feature is se-
lected and the End of Cycle Signal is on, an
audible sound will be heard every 5 minutes
until the clothes are removed, or until the
Wrinkle Shield feature is finished.
3-5
Louder
Softer
Off
Hold for 3 Seconds To
Lock / Unlock Control