Heater - Whirlpool duet GGW9200L Series Job Aid

HEATER

Refer to page 4-10 for the procedure for ser-
vicing the heater.
1. Disconnect the electrical power to the
dryer.
2. Set the ohmmeter to the R X 1 scale.
3. Disconnect one of the wire connectors from
the heater terminal block.
4. Touch the ohmmeter test leads to the ter-
minals on the heater terminal block. The
ohmmeter should indicate between 7 and
12 ohms.
5-3
Heater Terminal Block