9 – COMPONENT ASSEMBLY AND DISASSEMBLY:
BE VERY CAREFUL when assembling and handling the parts, as there are some
Avoid accidents: DISCONNECT THE DRYER from electric supply
9.1 – Door Reversing :
a) Remove the Knob, loosen the Phillips screws in the Upper Panel and pull it upwards.
b) Release the Upper Hinge using a 5/16" socket wrench. Pull the door to release it from the lower hinge.
c) Remove the Lower Panel and release the lower hinge.
d) Invert the position of Door Bushings and plugs.
e) Remove the Door Plug and install a Door Catch in its place. The reversed door has now two Door Catches
and no Plugs.
f) Loosen the screws at the left side of Instrument Support and remove it from the Dryer.
g) Invert the door latch Coupler and the Plug of Front Panel with the aid of nose pliers.
h) Reinstall the Instrument Support
Fasten the Lower Hinge to the left side of Door in the first place. The Upper Hinge must be fastened to the
lower part of Dryer and the Lower Hinge will be fastened to the upper part.
Fit the Door in the Hinge Pin and install the other Hinge.
k) Check the opening and closing movement of the Door to test its movements. It must be aligned, locking
and sealing in a perfect way.
Reinstall the Upper and Lower Panels, along with the Knob.
MSEX0110i – Wall Mounted Dryer WSI24ABBPH00
Sharp-edged surfaces. Use gloves for your protection.
before any maintenance procedure.
Page 13 -21