Product Operation - Whirlpool duet GGW9200L Series Job Aid

Gas and electric dryers
Table of Contents

Advertisement

Control On
Status
Sensing
Normal
Wet
More
Damp
Casual
Cool Down
Less
Delicate
Cycle Complete
Wrinkle Shield
Delicate
Dryness
Control Locked
Level
Automatic Cycles
WARNING
EXPLOSION HAZARD
Keep flammable materials and vapors,
such as gasoline, away from dryer.
Do not dry anything that has ever had
anything flammable on it (even after wash-
ing).
Failure to follow these instructions can
result in death, explosion, or fire.
FIRE HAZARD
No washer can completely remove oil.
Do not dry anything that has ever had any
type of oil on it (including cooking oils).
Items containing foam, rubber, or plastic
must be dried on a clothesline or by using
an Air Cycle.
Failure to follow these instructions can
result in death or fire.

PRODUCT OPERATION

Heavy Duty
Hold To
Start
Timed Dry
Super
Touch Up
Quick Dry
Manual Cycles
Estimated
88:88
Time
Remaining
More
Time
Less
Time
Pause
Cancel
Wrinkle Shield
STARTING THE DRYER
The following is a guide to starting the dryer.
Please refer to specific sections of the Owner's
Manual for more detailed information.
1.
Clean the lint screen before or after each
cycle.
2.
Place the laundry into the dryer and close
the door.
3.
Rotate the dial to select either an Auto-
matic or Manual Cycle, then press the
Control On button. The preset settings
and drying time for the cycle chosen will be
displayed.
To use an Automatic Cycle:
• Point the dial to an Automatic Cycle.
• Select the Dryness Level to adjust how dry
you want the clothes. The time displayed is
an estimated length of the cycle based on
the dryness level selected. As the cycle runs,
the control senses the dryness of the load
and adjusts the time automatically for the
selected dryness level.
NOTE: Time is not adjustable for Automatic
Cycles. Pressing the More Time or Less Time
buttons will cause a triple beep, indicating that
the time cannot be changed.
3-1
High
Medium
Low
Louder
Extra Low
Softer
Off
On
Air Only
End Of Cycle Signal
Temperature
Hold for 3 Seconds To
(Manual Cycles only)
Lock / Unlock Control
More
Less
Dryness
Level

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents