Optional Exhaust Information; Leveling The Dryer - Whirlpool duet GGW9200L Series Job Aid

OPTIONAL EXHAUST INFORMATION

WARNING
ELECTRICAL SHOCK HAZARD
Cover unused exhaust holes with the
following kit:
279818 (white)
Contact your local dealer.
Failure to follow these instructions can
result in death, fire, electrical shock, or
serious injury.
The dryer can be converted to exhaust out the
right or left sides, or through the bottom.
Make sure that the floor is level with a maxi-
mum slope of 1" (2.5 cm) under the entire
dryer. If the slope is greater than that stated,
install the "Extended Dryer Feet Kit," #279810.
If the dryer is not level, the clothes may not
tumble properly, and the automatic cycles may
not operate properly.
NOTE: Do not use the leveling legs if the dryer
will be installed on a pedestal.

LEVELING THE DRYER

2-10
Number Of Type Of
90° ° ° ° Turns
Vent
Or Elbows
Rigid metal
0
Flexible metal
Rigid metal
1
Flexible metal
Rigid metal
2
Flexible metal
Rigid metal
3
Flexible metal
Rigid metal
4
Flexible metal
4 Leveling Legs (supplied in parts package)
Box Or Angled
Louvered Hoods
Hoods
64 ft (20 m) 58 ft (17.7 m)
36 ft (11 m) 28 ft (8.5 m)
54 ft (16.5 m) 48 ft (14.6 m)
31 ft (9.4 m) 23 ft (7.0 m)
44 ft (13.4 m) 38 ft (11.6 m)
27 ft (8.2 m) 19 ft (5.8 m)
35 ft (10.7 m) 29 ft (8.8 m)
25 ft (7.6 m) 17 ft (5.2 m)
27 ft (8.2 m) 21 ft (6.4 m)
23 ft (7.0 m) 15 ft (4.6 m)