10. To remove the belt and drum:
a) Grasp the sides, lift, and pull the front
panel forward so that the top screws
are free of the keyhole slots. Lower the
panel so that the drum sits on the com-
ponents inside the cabinet, and slide
the front panel and rollers away from
the drum.
Keyhole Slot
b) Slide the belt off the drum.
Lift
Belt
c) Lift the drum and remove it from the
unit.
REASSEMBLY NOTE: Use the following illus-
tration as a guide when installing a new belt.
Drum
Idler Pulley
Drive Motor Pulley
4-12