Precautions; Transportation; Preparation; Operating Environment - Huawei UPS2000-G-1KRTS User Manual

UPS2000-G-(1 kVA-3 kVA)
User Manual (2016, Russia)

1.1 Transportation

Before transporting the UPS, pack it with original packing materials to protect it from
collision.

1.2 Preparation






1.3 Operating Environment

Do not place the device in an environment that has inflammable and explosive air or gas. Do
not perform any operation in this kind of environment.
Any operation on any electrical device in an environment that has inflammable air can cause
extreme danger. Strictly obey the operating environmental requirements specified in related
use manuals when using or storing the device.
Keep the UPS away from the following environments:

Issue 02 (2016-07-28)
The UPS may have condensation inside after it is moved from a cold environment to a
warm environment, such as an indoor environment. In this case, install the UPS after it is
completely dry. Therefore, install the UPS at least 2 hours after it is placed in the target
place.
Never install the UPS in a damp environment or a place with water nearby.
Never install the UPS in a place exposed to sunlight or with a heater nearby.
Never block or shield the air vents on the UPS shell.
Places where the temperature and humidity are beyond the range of 0–40° C and
0%–95% RH respectively
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

Precautions

1 Precautions
1