UPS2000-G-(1 kVA-3 kVA)
User Manual (2016, Russia)
5.
Issue 02 (2016-07-28)
Figure 3-10 Connecting communications cables to the 3KRTS UPS
The USB channel supports a serial data communications protocol between the UPS and the PC.
If you connect a DB9 connector to the RS232 port, the UPS can communicate with the PC over
serial data.
The UPS support either USB or RS232.
To monitor the UPS over a PC, also need to install the monitoring software iManager NetEco 1000U.
For details about how to install and use the iManager NetEco 1000U, see the iManager NetEco
1000U User Manual. The software and the user manual are available at
http://support.huawei.com/enterprise.
Connect the UPS input power cable.
Take out input power cables from the fitting bag, and connect mains input power cables
to the UPS.
Figure 3-11 Connecting cables to the 1KRTS UPS input
Figure 3-12 Connecting cables to the 2KRTS UPS input
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installing the UPS
14