Installation Checklist
Following are the steps needed to install the Balancer. Perform them in the order shown.
☐
1. Review the installation Safety Rules.
☐
2. Plan for Electrical Work.
☐
3. Make sure you have the necessary Tools.
☐
4. Select the Installation Site.
☐
5. Make sure there is adequate Clearance on all Sides.
☐
6. Unpack the Components.
☐
7. Identify the Components on the Back of the Unit.
☐
8. Install the Control Panel.
☐
9. Install the Hood.
☐
10. Install the Shaft.
☐
11. Anchor the Unit.
☐
12. Connect to a Power Source.
☐
13. Test the Balancer.
DST30P Wheel Balancer
Requires a licensed, certified Electrician
10
.
P/N 5900163 — Rev. C1 — March 2020