Installation Checklist - Ranger DST-64T Installation And Operation Manual

Installation Checklist

Following are the steps needed to install the Balancer. Perform them in the order shown.
☐
1. Review the installation Safety Rules.
☐
2. Plan for Electrical Work.
☐
3. Make sure you have the necessary Tools.
☐
4. Select the Installation Site.
☐
5. Make sure there is adequate Clearance on all Sides and Above.
☐
6. Unpack the Balancer.
☐
7. Identify the Components on the Back of the Unit.
☐
8. Install the Display Panel.
☐
9. Install the Mount Box.
☐
10. Install the Hood.
☐
11. Install the Outer Arm (DST-64T only).
☐
12. Install the Shaft.
☐
13. Anchor the Unit.
☐
14. Connect to a Power Source.
☐
15. Test the Balancer.
☐
16. Review the Final Checklist.
DST-64T / DST642D Wheel Balancers
Requires a licensed Electrician
10
.
P/N 5900192 — Rev. F — March 2021