Components
Balancer components include:
•
Control Panel. Controls the Balancer and displays information.
•
Hood. Covers the Wheel while it spins. Lowering the Hood starts the Wheel spinning.
•
Inner Arm / Distance Ruler. Pulls out to measure the distance from the side of the Balancer
to the Inner Edge of the Wheel. Includes a ruler that shows distance in Centimeters.
•
On/Off Switch. Turns the Balancer on and off.
•
Trays. Storage for Clip-On Weights and other items you want to have handy.
•
Adhesive Weight Dispensers. Dispenses your Adhesive Weights.
•
Side Storage Rack. Holds more items you want to have handy.
•
Cone Hangers. Hold your Mounting Cones when not in use.
•
Anchor Bolt Holes. Used to anchor the Balancer to the ground.
•
Brake Pedal. Step on to hold the Wheel in place.
The Inner Arm/Distance Ruler is not visible in this view.
DST30P Wheel Balancer
6
P/N 5900163 — Rev. C1 — March 2020