Figure 3-32 Installing An Ons 15252 Mcu Network Adaptation Module (Part 2) - Cisco ONS 15200 Series Installation, Setup & User Manual

Figure 3-32 Installing an ONS 15252 MCU Network Adaptation module (Part 2)

Step 15 After connecting the NAM fiber to the HFM, push the HFM slightly upward to expose the two lateral
grooves on the top of the HFM.
Note
Step 16 Insert the fiber into the lateral grooves and snap the HFM back into place
Cisco ONS 15200 Installation, Setup, and Test Manual
3-44
Do not install fiber with sharp bends. The radius of all bends must be at least 35 mm (1.4 in.).
Chapter 3 Installation
(Figure 3-33).
78-13765-01