Table of Contents
Advertisement
Figure 3-18 ONS 15201 SCU power cable connector
–48 VDC RETURN (+)
Insert the power cable connector into the PS-1 connector.
Step 3
Hand-tighten the power cable connector to firmly mate it to the PS-1 connector.
Step 4
Connect the AC line cord on the AC-to-DC power supply to the AC power grid.
Step 5
Procedure: Connect a Redundant Power Source to the ONS 15201 SCU
Route the SCU redundant AC-to-DC power supply cable to the PS-2 power connector on the front of the
Step 1
unit.
Step 2
Align the connector on the power cable with the PS-2 connector on the front of the ONS 15201 SCU.
Figure 3-18 on page 3-24
Step 3
Insert the power cable connector into the PS-2 power supply connector.
Step 4
Hand-tighten the power cable connector to firmly mate it to the PS-2 connector.
Cisco ONS 15200 Installation, Setup, and Test Manual
3-24
Figure 3-16 on page 3-21
shows the power cable connector.
–48 VDC (–)
shows the SCU PS-2 connector.
Chapter 3
Installation
78-13765-01
Advertisement
Table of Contents
