Nortel Meridian 1 Hardware Replacement Manual page 84

Page 84 of 250 Replacing equipment
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
You selected to copy the hard disk /p partition from IODU on Core 1
to IODU on Core 0.
60 MB of disk will be copied.
This wil erase old system files, Database files will NOT be erased.
Note that ERASED FILES CANNOT BE RECOVERED.
NOTE: Copy progress will be indicated by ... , one '.' per MB.
You may Continue with the copy operation or Quit now
and leave your system unchanged.
Please enter:
<a> -Copy /p partition from one Core 1 to Core 0.
<CR>-->
<q> - Quit.
Enter Choice > a
553-3001-520 Standard 17.00 January 2002
17 Select <a> to copy /p partition from Core 1 to Core 0.
18 Select <a> to continue with the upgrade.
19 When the software is installed successfully, press <CR> to install
CP-software from the hard disk to Flash EEPROM, and install
CP-BOOT ROM.
20 Select <a> to continue with ROM upgrade.
21 Select <a> to continue with ROM upgrade.
22 When the Status Summary appears, press <CR> to continue.
23 When the Install Menu appears, select <f> to install IOP-ROM.
553-7739