Nortel Meridian 1 Hardware Replacement Manual page 76

Page 76 of 250 Replacing equipment
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — —
You will now perform the database installation.
Note: If you are installing the Database from a floppy disk,
please insert the correct disk now.
Please enter:
<CR>-->
<a> - Install CUSTOMER Database
(the customer database diskette must be in the Core 1 disk drive).
<b> - Install DEFAULT Database
(the installation CDROM must be in the Core 1 disk drive).
<d> - Copy Database from the redundant disk.
<e> - Check the Database that exists on the hard disk.
<q> - Quit.
Enter Choice > a
553-3001-520 Standard 17.00 January 2002
22 Select <a> to install the customer database.
23 Select <y> to start installation.
24 Select <a> to continue the database installation.
25 Select <a> to confirm that the database disk is in the drive.
26 Select <y> to load the database.
27 If the database does not fit on one diskette, you will be prompted to
insert additional diskettes.
28 Press <CR> to delete the hardware infrastructure database files from
the hard disk.
553-7779