Nortel Meridian 1 Hardware Replacement Manual page 110

Page 110 of 250
Nortel Meridian - 1 Software/Database/PEROM CDROM INSTALL Tool (x11)
— — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
The Software Installation Tool will install or upgrade Meridian-1
System Software, Database and the PE-ROM (both CP and IOP ROM).
You will be prompted throughout the installation and given the
opportunity to quit at any time.
Please enter:
<u> - To Install menu.
<CR>-->
<t> - To Tools menu.
<q> - Quit.
Enter choice > u
553-3001-520 Standard 17.00 January 2002
Replacing equipment
a. For NT5D21 Core/Net Modules, insert the IODU/C in slots 17,18,
and 19.
8 Lock the locking devices by pushing them gently towards the
faceplate. Set the ENB/DIS switch to ENB.
A blinking letter "E" and number "5" displayed indicates that a failure occurred.
In that case, reseat the Security Device in its holder and reinsert the card.
9 Activate the software installation tool by inserting the Install disk from
the software package into the IODU/C.
10 Press the MAN RST button on the CP card in the Core containing the
replacement IODU/C.
11 At the Main Menu select <u> to go to the Install Menu.
M A I N M E N U
553-7780