Replecement Parts In Trimming Assembly; Before Replacing The Sprocket Shaft 1/Sprocket/Sprocket Bearing (Left) (150,000 Sets); Sprocket Shaft 1/Sprocket/Sprocket Bearing (Left) (150,000 Sets); Before Replacing The Sprocket Shaft 1/Sprocket/Sprocket Bearing (Middle) (150,000 Sets) - Canon Perfect Binder-C1 Replacement Manual

Chapter 2

2.1.48 Replecement parts in trimming assembly

No. Parts Name
[1] Sprocket bracket
[2]
Sprocket shaft 1
- Sprocket shaft 1 (left)
- Sprocket shaft 1 (middle)
[3] Sprocket shaft 2
[4]
Sprocket
- Sprocket (left)
- Sprocket (middle)
- Sprocket (right)
[5]
Sprocket bearing
- Sprocket bearing (left)
- Sprocket bearing (middle)
- Sprocket bearing (right)
2.1.49 Before replacing the sprocket shaft 1/sprocket/
sprocket bearing (Left) (150,000 sets)
1) Draw out the trimming assembly. (page 2-8)Reference[Drawing out the
Trimming Assembly]
2.1.50 Sprocket shaft 1/Sprocket/Sprocket bearing (Left)
(150,000 sets)
1) Unhook the two springs [1] to release the tension of the chain.
2) Release the harness from the edge saddle [1] and remove the seven screws
[2], then turn the chain guide to the arrow direction.
[1]
2-30
T-2-3
Q'ty
1
2
(1)
(1)
1
3
(1)
(1)
(1)
3
(1)
(1)
(1)
[1]
F-2-130
[2]
F-2-131
3) Release the harness from the 2 edge saddles [1] and the wire saddle [2],
and remove the 7 screws [3]. Then turn the chain guide to the arrow di-
rection.
0024-6867
[1]
[2]
4) Release the support portion [1] of the wire saddle to free the harness. After
removing the 2 E-rings [2], remove the sprocket shaft 1 [3], sprocket [4],
sprocket bearing [5] and bushing [6].
0024-6869
0024-6870
2.1.51 Before replacing the sprocket shaft 1/sprocket/
sprocket bearing (middle) (150,000 sets)
1) Draw out the trimming assembly. (page 2-8)Reference[Drawing out the
Trimming Assembly]
2) Remove the sprocket shaft 1/sprocket/sprocket bearing (left). (page 2-
[2]
30)Reference[Sprocket
(150,000 sets)]
F-2-132
[2]
F-2-133
shaft 1/Sprocket/Sprocket bearing (Left)
[3]
[3]
[1]
[2]
[6]
[5]
[4]
[3]
[2]
0024-6873